6.2.1
Syntax #2: TCP/UDP/SMS – Geofence reports
@ <ID>, <MSG#>, <PF>, <GPS>, <BV>, <RSSI>, <STARTER>, <IGNIT>, <D>, <T>, <LT>, <LN>, <AL>,
<SP>, <DIR>, <SAT>, <HDOP>, <MI>, <GF_ID> !
Event number (MSG#)
Description
602
Alert message when rectangular geofence crossing is detected
603
Alert message when circular geofence crossing is detected
604
Alert message when polygonal geofence crossing is detected
6.3
Syntax #3: UDPwACK
General report: @ <ID>, <MSG#>, <PF>, <GPS>, <BV>, <RSSI>, <STARTER>, <IGNIT>, <D>, <T>,
<LT>, <LN>, <AL>, <SP>, <DIR>, <SAT>, <HDOP>, <MI>, <SEQ> !
Geofence report: @ <ID>, <MSG#>, <PF>, <GPS>, <BV>, <RSSI>, <STARTER>, <IGNIT>, <D>, <T>,
<LT>, <LN>, <AL>, <SP>, <DIR>, <SAT>, <HDOP>, <MI>, <GF_ID>, <SEQ> !
–
Where <SEQ> is the sequence number (0 to 255, incremented on each successful UDP acknowl-
edgment from the server) assigned by the unit if UDP with acknowledge mode is enabled.
The format of the UDP acknowledgment from the server: SG*UDP_ACK,<ID>,<SEQ>,<CR>,<LF>
–
Where <CR> is the Carriage Return character
–
Where <LF> is the Line Feed character
Confidential, the whole document is the sole property of Maestro Wireless Solutions ltd.
3603-9, 36/F., 118 Connaught Road West, Sheung Wan, Hong Kong
49
