MAESTRO WIRELESS SOLUTIONS
| Services
193
E-SERIES | USER MANUAL VERSION 2.0.1
http://support.maestro-wireless.com
Parameters
Description
SMS Configuration
SMS Administrator
Displays the number of Administrators configured
to receive the diagnostics information of the router
after they send the command using SMS.
Maximum 4 SMS Administrator can be configured.
Note
If no number is configured than the
router will accept SMS from any
number.
Mobile Number
Enter the mobile number.
The format of mobile number must be:
<countrycode><phonenumber>
List of Commands
Command name
Command
AT+REBOOT=1
Reboot: reboot the modem
AT+CELLDIAG?
Cell diagnostics: will give you IMEI, CREG, COP,
CSIG
AT+LANDIAG?
LAN diagnostics: Will give LAN IP address,
AT+WANDIAG?
Wired WAN diagnostics:
AT+WANPING=<I
PA>
Wired WAN ping: will ping the wired WAN
interface
AT+LANPING=<I
PA>
LAN ping: will ping the wired LAN interface
AT+REMACC=<1/
0>
Remote access: will enable; AT+REMACC=<1> or
disable AT+REMACC=<0> remote access
AT+HWI?
Hardware information: will give you hardware
information such as model number
AT+SWI?
Software information: will give you software
information such as firmware version
Table 12.3-1: SMS Service Configurations