MAESTRO WIRELESS SOLUTIONS
| Network
134
E-SERIES | USER MANUAL VERSION 2.0.1
http://support.maestro-wireless.com
always online.
Tracking reliability
Enter the number of response that must be
received from tracking IP Addresses to consider
the Interface as up.
Ping count
Enter the number of ping packets that will be sent.
The default ping count is 1.
Ping timeout
Enter the time to wait for a response to ping
request sent before declaring the interface
unreachable. The wait time is in seconds.
The default timeout is 2 seconds.
Ping interval
Specifies the time in seconds between sending
ping packets.
The default ping interval is 5 seconds.
Interface down
The no. of consecutive failed attempts after which
the interface is declared down.
The default value for failed attempts is 3.
Interface up
The no. of consecutive successful attempts after
which the interface to determine the reliability of
the network connection through the interface.
The default value for successful attempts is 3.
Metric
Enter the Interface Metric.
The route with least metric is considered as best
route.
The default metric assigned to the interface is 1.
For load balancing between two interfaces, both
the interface must have the same metric value on
the Member Configuration page.
Table 11.2-4: Modify MWAN Interface
