madur electronics maMoS 100, Руководство пользователя, Страница: 33 / 96

www.madur.com Manual maMoS 100/200/300/400
Picture 31. Example of a maMoS monitors network.
As the switch serves only nine monitors, if the number of the devices is bigger, two
switches should be connected together with the help of a monitor connector and the com-
puter should be connected to one of the switches. The picture below shows an example of
a maMoS monitors network.
5.3.2. Communication via USB port
Proper cooperation of the monitor equipped with the USB port and the MaMoSII.exe pro-
gram is possible after the appropriate drivers have been installed. The drivers can be
found on the CD provided with the monitor but can be also downloaded from the
www.madur.com website). The installation of the drivers is not complicated and takes just
a few minutes. The installation procedure for the Windows XP system has been described
below (the installation process for other Windows systems runs similarly).
The installation of the drivers for the monitor with the USB port runs as follows:
1. The madur_USB_drivers folder should be copied from the CD and saved
anywhere on the disk, for instance C:\Program Files\Common Files\ .
2. The monitor should be connected to a free USB port.
3. The monitor will be detected as a new device and the " Found New Hardware
Wizard" window will open (Picture 32.).
33