CE And RoHS Declaration Of Conformity
The device complies with the requirements set
forth in the council Directive of the law of the Member States relating to
electromagnetic compatibility (2004/108/EC), the Low Voltage Directive
(2006/95/EC), and the Directive on restriction of the use of certain
hazardous substances in electrical and electronic equipment (2002/95/EC)
(RoHS). The compliance with these three Directives has been evaluated in
accordance to the following standards: EN 55011 (1998) + A1 (2000) +
A2 (2003), EN 55024 (1998) + A1 (2001) + A3 (2003), EN 61000-4-2
(2001), EN 61000-4-3 (2001), EN 61000-4-4 (2001), and EN 61000-4-6
(2001).
FCC Declaration Of Conformity
The device has passed the following tests of compliance:
FCC (2003) - Title 47, Part 15, class A, Radio frequency devices.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Usage
In general, this device is designed to be operated as a hardware control
interface to be set up between a computer and various types of controllable
lights via DMX512 (USB-to-DMX). Do not use the interface for any other,
deviant purpose.
The device can be connected to and disconnected from the computer during
use and without a reboot (Hot Swapping & Plug and Play).
Up to 60 interfaces can be connected to a USB host controller and used at
the same time while maintaining a stable and high frame rate (Frame Rate
Stability). Active USB 2.0 ports are required in this case.
Содержание NEO
Страница 1: ......
