MADRIX LUNA 16 Скачать руководство пользователя страница 36

Страница: 36 / 115

[Part 3] MADRIX 5 Software

//36

www.madrix.com

MADRIX LUNA User Manual

ACN CID -

Being a network protocol, Streaming ACN sends a so-called CIDs [Component Identifier].

- Every single ACN device has such a unique ID.

- When using Streaming ACN, your MADRIX 5 Software is one of those devices.

- When you start MADRIX 5 for the first time, this ID will be generated automatically for you. From this point

onwards it will be used on your PC.

- With this ID your MADRIX 5 Software can be easily identified in the network. Interfaces can detect this unique

ID and can be configured to receive data from this particular device. Please note that the ACN interface must

support this feature.

Do not change the ACN CID, unless you are an experienced user!

Click

to close the window.

5] Activating Devices

Each of the ports need to be activated if that is not already the case.

Go to the menu

Preferences > Device Manager... > DMX Devices

[Keyboard shortcut:

]

Select your devices and their ports in the list. The corresponding number of output universes will be shown.

Right Mouse Click

on the column

State

to set from

Off

[indicated by green light]. By default, all

output ports should be already activated.

Содержание LUNA 16




















































































































Результаты поиска

Содержание LUNA 16

Отзывы:

MADRIX LUNA 16, Руководство пользователя, Страница: 36 / 115

Результаты поиска

Содержание LUNA 16

Отзывы: