MADRIX LUNA 16, Руководство пользователя

Страница: 105 / 115

[Part 5] General
//105
www.madrix.com
MADRIX LUNA User Manual
Using Several Devices In A Network
Usually, you will use at least 2 devices in a network [for example, 1 MADRIX PC and 1 Art-Net node or 1 MADRIX PC
and 1 console]. As explained above, you will need to configure various network settings not only for your MADRIX PC
but also for the other devices.
To be able to communicate with each other, all devices have to be in "the same network". That means:
§
All devices need to be physically connected with each other [through network equipment, such as hubs or switch
and/or network cables]
§
All devices need to have compatible network settings
Using several devices in a network does not mean that all should have the same IP address. That will not work!
Instead, follow these rules:
§
Set up all devices within the same IP address range, but never with the same IP address
[for example, MADRIX PC: 10.204.226.101 and Art-Net node: 10.204.226.102]
§
Set up all devices with the same Subnet mask e.g., 255.0.0.0]
§
If recommended, set up all devices with the same Default gateway [e.g., 10.0.0.1]
Changing The Priority Of Network Adapters
You can change the order in which Windows and MADRIX 5 accesses your network adapters. By changing the order,
you can specify which network adapter [network card] is used first and as the main connection.
§
1] In Windows 10, go to Start > Windows System > Control Panel > Network and Sharing
Center > Change adapter settings