open the main access door and carefully cut the 4 to 6 <!> ties that hold the running gear in
place. Do not use straight knives or saws, but use a razorside cutters or a hook knife.
Commissioning
The grab crane operates on 220 volts / 50 hertz. Inspect the outside and inside of the
machine as well as the power cord for defects or damage. To do this, open all panels and
doors and pay particular attention to damage or loose connections of electrical wiring and
components. Do not connect the machine if the machine, wiring, components or
connection cable are damaged. Close all doors and panels of the machine and lock them
with the enclosed keys. After checking, insert the supplied connection cable into the back
of the machine and plug the plug into a proper socket. Then turn on the switch at the back
of the machine.
The machine starts up automatically. The claw may be moving to the zero point at the front
left of the machine.
Operation of the machine
By pressing the joystick on the machine in a certain direction, the gripper in the machine
follows this direction of movement along the X axis (left-right) or Y axis (front-back). When
the joystick is released, the gripper stops moving in the X and Y axis direction. If you now
operate the large push button, the gripper will drop down and perform a squeezing
movement. If an object is under the gripper, it may be picked up by the gripper and brought
made for arcade Netherlands - 2022 manual
page:7 / 16
