K-160
You’ll need these items to complete this kit
Specifications
Length: 78.5”
Diameter 4.0”
Weight: 76oz
Recovery: 48” Nylon Chute
Motor Mount: 54mm
Fins: 6 - 1/4” Plywood
CG: 57” from nose tip
(1) Nose Cone
(1) Pre-slotted main body tube (31”)
(1) Payload section body tube (31”)
(2) Centering rings
(1) Coupler
(1) Bulkhead
(1) Motor tube
(6) laser-cut fins
(2) Eyebolt, nut and washer
(1) Nylon shock cord
(2) Rail buttons, (2) screws, (1) weld nut
(1) 12x12 Chute Protector (optional)
(1) 48” Nylon chute (optional)
Parts List
FRENZY
EPOXY
Part B
EPOXY
Part A
5 Minute Epoxy
120/220 Sandpaper
Filler and Paint
Pencil
Paint
Filler
Zap or CA
Super Glue
CA
Super Glue
Lead Shot
for Balance
Shot
Motor Retainer
®
8
98666 00160
4
