Specifications:
Length: 26”
Diameter 2.2”
Weight: 8oz
Recovery: 18” Nylon Chute
Motor Mount: 29mm
Features: Cut Lettering Vinyl Decal
Fins: 3 - 1/8” Plywood
CG: 17.75” from nose tip
Recommended Motors:
Single Use
RMS
D12-5* 500’
E16W-7 950’
E9-4 *
790’
E23T-6 880’
E15-7* 1130’
F22J-7 1610’
F20W-7 1580’
F40W-7 1840’
*Requires 29/24 adaptor
Parts List
1. (1) Custom balsa nose cone
2. (1) pre-slotted body tube
3. (2) Centering rings
4. (1) 29mm motor tube
5. (3) laser-cut fins
6. (1) Kevlar® shock cord section
7. (1) Nylon shock cord section
8. (1) 6”x6” flameproof chute protector
9. (1) 18” Nylon chute
10. (2) ¼” launch lugs
11. (1) Cut Lettering Vinyl Decal
Required to complete
: 5 minute epoxy,
120/220 sandpaper, masking tape, finishing
filler/paint.
K-118
8
98666 00118
5
Batray
tm
