Mad Bean Pedals AQB_MOD 2019, Быстрый старт

Страница: 1 / 6

AQB_MOD 2019
FX TYPE: delay modulation
© 2019 madbeanpedals
The AQB_MOD is an add-on board to enable modulation on the Aquaboy (DM-2) project. For the
2019 version, I’ve added an optional LED that displays the modulation rate and an additional resistor
to prevent the depth control from being too extreme.
Controls
• RATE: Sets modulation rate from slow to fast.
• DEPTH: Sets modulation depth from min to max.
• SW: Switches the modulation on and off.
Terms of Use: You are free to use purchased AQB_MOD circuit boards for both DIY and small commercial operations. You may not
offer
AQB_MOD
PCBs for resale or as part of a “kit” in a commercial fashion. Peer to peer re-sale is fine, though.
Layout &Traces