Macurco DVP-120C, Инструкция пользователя

Страница: 50 / 80

Macurco DVP-120C Manual
REV – 1.0 [34-8708-4770-8 ] 50 | P a g e
H o r n : 5 O F F
Figure 4-84 Strobe Warning Signal
This display example shows that the horn will not signal a warning condition. The signal definitions are:
•
1 Continuous
•
2 Intermittent One second on at two-second intervals
•
3 Double tap Two beeps at five-second intervals
•
4 Triple tap Three short beeps at ten-second intervals
•
5 Off Horn will not sound (default)
4.13.8.8 Warning Strobe Signal
W a r n i n g S i g n a l s
S t r o b e : 5 O F F
Figure 4-85 Strobe Warning Signal
This display example shows that the strobe will not signal a warning condition. The signal definitions are:
•
1 Continuous
• 2 Intermittent One second on at two-second intervals
•
3 Double tap Two beeps at five-second intervals
• 4 Triple tap Three short beeps at ten-second intervals
• 5 Off Strobe will not flash (default)
4.13.8.9 Trouble Signal Summary
The trouble signals are in response to one or more sensor faults, either as a defined current level or because of
wiring problems.
T r o u b l e S i g n a l s
B u z z
Figure 4-86 Trouble Signals
This display example shows that troubles are signaled by the internal buzzer only.
4.13.8.10 Trouble Buzzer Signal
T r o u b l e S i g n a l s
B u z z : 4 T r i p l e
Figure 4-87 Buzzer Trouble Signal
This display example shows that the buzzer will signal a trouble condition with a triple tap signal. The buzzer signal
definitions are:
•
1 Continuous
•
2 Intermittent One second on at two-second intervals