DMK-1 Installation Guide
REV
–
1.0
[34-2900-0065-9 ]
3
|
P a g e
1
General Safety Information
1.1
Warnings
WARNING
Each person using this equipment must read and understand the information in this
user manual before use. Use of this equipment by untrained or unqualified persons or
use that is not in accordance with this user manual, may adversely affect product
performance.
Use only for monitoring the gas which the sensor and monitor is designed to detect.
Failure to do so may result in exposures to gases not detectable and cause serious
injury or death. For proper use, see supervisor or user manual, or contact Technical
Support at 1-844-325-3050.
This detector helps monitor for the presence and concentration level of a certain
specified airborne gas. Misuse may produce an inaccurate reading, which means that
higher levels of the gas being monitored may be present and could result in
overexposure and cause serious injury or death. For proper use, see supervisor or User
manual, or contact Technical Support at 1-844-325-3050.
The DMK-1 is specifically designed for use with Macurco gas detectors. After the DMK-
1 is installed and tested, refer to the appropriate Macurco gas detectors User manual
for installing and testing the detector to be installed. For additional support, contact
Technical Support at 1-844-325-3050.
During installation, a Pressure Differential test must be performed on the DMK-1 to
ensure proper installation and function of the device.
