MACTRON MediTRON WMP2157, Руководство пользователя

Страница: 16 / 23

12
3.1 How to replace the 2.5" SSD
1. If you want to replace the 2.5" SSD, unscrew the thumbscrew and two screws of
the bracket, then remove it.
2. Unfasten the two screws (M3*4) and
remove old SSD.
As shown, install a new SSD in the
bracket and secure with the two
screws (M3*4).
3. Slide the bracket back into the
chassis, then tighten the thumbscrew
and two screws.
CAUTION! The thumbscrews should be tightened with a tool after both
initial installation and subsequent access to the panel.
c
Old SSD
a
b
b
a
c
New SSD