MACROMEDIA COLFUSION MX 7 - INSTALLING AND USING COLDFUSION..., Инструкция по использованию

Страница: 59 / 72

Disabling Remote Development Services 59
4.
Prepare your CORBA server side, as follows:
a
Start your Visibroker osagent service or process, if it is not already running, by entering the
following command:
osagent
Note: If you must connect to an osagent in another subnetwork, include the following lines in
the vbjorb.properties file:
vbroker.agent.addr=<IP address of machine running OSAGENT>
vbroker.agent.port=<port>
b
Start the Interface Repository and load it with the IDL file that you plan to use, by entering
an
irep
command, as in the following example:
irep myir MyIDLFile.idl
c
(Optional) Start the Naming Service by entering a command like the following:
nameserv namingroot
Note: The name of the Naming Service ( namingroot in the previous example) must match the
value for SVCnameroot in the vbjorb.properties file.
d
Start Visibroker on your CORBA server.
For more information, see the Borland Visibroker documentation.
5.
Restart ColdFusion MX 7 for your changes to take effect.
For more information, see “Managing ColdFusion MX 7” on page 46 .
You can now make CORBA invocations from ColdFusion MX 7. For more information about
integrating CORBA objects into ColdFusion MX 7, see
ColdFusion MX Developer’s Guide .
Disabling Remote Development Services
If you use Macromedia Dreamweaver MX or Macromedia H to develop your
applications, you can access a remote ColdFusion MX 7 server using HTTP. However, you must
configure Remote Development Services (RDS) in your integrated development environment
(IDE), and RDS must be enabled in ColdFusion MX 7. Using RDS, IDE users can securely
access remote files and data sources, build SQL queries from these data sources, and debug CFML
code.
Note: The ColdFusion Report Builder uses RDS for the Query Builder and for charting support.
However, for security reasons, Macromedia recommends that you disable RDS on a production
server. To disable it, you must disable the RDSServlet mapping.
To disable the RDSServlet mapping:
1.
Back up the web.xml file.
This file is in the cf_root \wwwroot\WEB-INF directory in Windows and in the
cf_root /wwwroot/WEB-INF directory on UNIX. In the multiserver and J2EE configurations,
this file is under cf_webapp_root /WEB-INF.
2.
Open the original web.xml file for editing.