Macnica Mpression Helio, Начало работы

Страница: 4 / 12

Mpression Helio Board
4
Getting Started - Mpression Helio Board
© Mpression by Macnica Group
1.
Overview
1.1 Introducion
This getting started guide walks you through how to setup a board and booting linux on Helio board.
After reading this document, you will be able to:

Basic setup for the Helio board

Writing microSD boot disk for the Helio board

Run U-Boot and Linux on the Helio board
1.2 Release Contents and Location
Macnica provides some of reference material for Helio Board as follows:

Pre-Built ALL-IN-ONE imeage to create MicroSD boot disk that is included:

Preloader

U-Boot

U-Boot script for bridge management

Linux Kernel

Device Tree Blob

Root File System

Golden Hardware Reference Design (GHRD)

Board References

Schematic

Bill of Materials

PWB data
All components can be downloaded from:
http://www.rocketboards.org/foswiki/Documentation/MacnicaHelioSoCEvaluationKit
1.3 Prerequisites
You need to prepare & setup following tools to boot up a Linux on Helio Board.

Terminal Software like TeraTerm (for UART input/output)

Win32DiskImager (to create SD card boot disk)

http://sourceforge.net/projects/win32diskimager