Mackworth Raiser, Руководство пользователя

Страница: 9 / 28

999061 – Revision A P a g e | 9 of 28
3.3 Transfer Aid Assembly
Place the handle in the brackets as shown in (Fig. 5) below.
4.0 FREQUENLY USED FUNCTIONS
The aid may be heavy for users and will need to be lifted with care, please operate the device with the use of the
castors wherever possible to prevent any injury.
Appropriate training in the following operating procedures should be undergone by any person operating the Transfer Aid, for
their own and the client’s safety and comfort. These instructions are designed to cover the method of using the Transfer Aid.
4.1 Adjusting Knee/shin Pad (Single Knee Pad)
Adjusting the knee/shin pad height on the raiser, in the following way:
1. On the rear face of the product release the Knee/shin pad from its current location by pulling on the black locking
plungers and the same time. (see Figure 8)
2. After releasing the knee/shin pad from its current location, it is now free to move up are down to the new preferred
height for the patient. (see Figure 9)
3. Once you are happy with the new position of the pad, simply release the black locking plungers by letting go of them
both at the same time.
Step 1 - With the handle and brackets aligned, press down
until fully inserted.
Step 2 - Lock the handles to the base assembly using two M8 Star handles
and nylon shoulder washers as shown in (Fig. 6)
Caution – care required to not trap fingers
when applying the two parts together
Figure 6
Figure 8
Figure 9 Figure 10
Figure 7
Figure 5