background image

8

X.200

Digital X Bus

Introduction

Then, when you have time, read this owner's 

manual. It contains descriptions of every knob, 
button, and slider on the console, and all the menus 
and windows on the touchscreens.

Throughout this manual you’ll fi nd illustrations 

with each feature numbered. If you want to know 
more about a feature, simply locate it on the appro-
priate illustration, notice the number attached to it, 
and fi nd that number in the nearby paragraphs.

This icon marks information that 
is critically important or unique 
to the X.200. For your own good, 
read them and remember them. 
They will be on the fi nal test.

This icon leads you to in-depth 
explanations of features and prac-
tical tips. While not mandatory, 
they usually have some valuable 
nugget of information.

Note:

 If you are unfamiliar with using a digital 

mixing console, refer to "Operational Basics" in the 
X.200 Quick-Start Guide for information on fader 
banks, V-Pot controls, and using the touchscreen.

Please write your serial number here for future 
reference (i.e., insurance claims, tech support, 
return authorization, etc.)

Purchased at:

Date of purchase:

Thank you for choosing a Mackie Digital X Bus 

for your next-generation digital recording console. 
The Digital X Bus offers you the fl exibility to confi g-
ure it for virtually any recording application through 
its extended card cage and I/O routing options. 
And it was designed with the ability to upgrade as 
advancements are made in digital recording technol-
ogy. But with 32-bit fl oating point processing, you 
have more power than just about any other digital 
mixing console in its class.

If you have any experience using a digital mix-

ing console, like our D8B, you’ll fi nd that using the 
Digital X Bus is very similar and you’ll be mixing 
away in no time. If this is your fi rst experience with 
digital mixing, we’ll run you through some of the 
unique aspects of using a digital mixing console. 
You will fi nd that once you’ve learned these differ-
ences and the incredible fl exibility that digital mix-
ing has to offer, you will have a very short learning 
curve, and wonder how you have lived without the 
power of digital mixing for so long.

HOW TO USE THIS MANUAL

We know that many of you can’t wait to get your 

new Digital X Bus hooked up, and you’re probably 
not going to read the manual fi rst (sigh!). So refer 
to the Digital X Bus Quick-Start Guide to help you 
get the mixer set up fast so you can start using it 
right away. At the end of the Quick-Start Guide are 
some hook-up diagrams that show typical hookups 
for tracking, mixdown, and using the Digital X Bus 
with a DAW (Digital Audio Workstation).

Содержание X.200



































































































Отзывы: