23
Owner
’s Manual
Owner’s Manual
ASIO Blues?
• There is a lot of great information here,
including ASIO driver downloads, FAQs,
troubleshooting, a forum and more!
Please review before calling Technical
Support:
o
Other Issues
• Please email or call Technical Support
if you are having any other issue not listed
here:
o
o 1-800-898-3211
Repair
For warranty service, refer to the warranty
information on page 41.
Non-warranty service is available at a factory-
authorized service center. To locate the nearest service
center, visit www.mackie.com/support/service-locator.
Service for ProFXv3 Series mixers living outside
the United States can be obtained through local
dealers or distributors.
If you do not have access to our website, you can
call our Tech Support department at 1-800-898-3211,
Monday-Friday during normal business hours, Pacific
Time, to explain the problem. Tech Support will tell
you where the nearest factory-authorized service
center is located in your area.
The bottom panels of the ProFX6v3 and ProFX10v3
have three non-threaded holes that allow it to be
fitted with an optional microphone stand adapter.
This lets you support the mixer on a standard mic
stand, and adjust its height and level to whatever
suits your strangely-complex set of preferences.
1. Order the Atlas AD-11B mic stand adapter
available from many a fine music store.
(It is made and distributed by Atlas Sound.)
2. Use three Trilobular thread rolling screws
6-32 x 1/4" long to secure the adapter
to the bottom of the mixer [see below].
Do not use screws longer than 1/4" as these
could damage the circuit boards. Do not use
screws shorter than 1/4" or the adapter will
not be securely fixed to the mixer.
Microphone Stand
