Mackie HR824, Руководство по обслуживанию

Страница: 20 / 39

20
Parts Numbering guide
040- Cables
055- Finished PCB Assy
100- Pots and resistors
200- Capacitors
300- Semiconductors
400- Jacks/Connectors
500- Switches
510- Fuses
550- Chassis Metalwork
600- Transformers
601- Inductors
610- Wires and Cables
640- AC line cords
700- Hardware
760- Knobs/Plastic
770- Fans
790- Misc./Packing
800- Printed Material
860- EPROM
• When ordering the woofer or tweeter, you must order the bucking magnet as well. Then you
will receive the assembly, with the bucking magnet already glued in place.
• Always order the woofer gasket at the same time, because during disassembly, this gasket
can get torn. The tweeter gasket (and the small gasket for the LEDs) comes with the woofer
gasket.
• Always use the inner box, the outer box and the thin white foam when shipping the HR824
and use all other means of safe-shipping protection. This will protect the finish from getting
scuffed up or the woofers from being damaged.
• The assembly diagrams in the fold out sections of this manual also show the part numbers, so
check there first for easier parts identification.
• Pages 22-26 show all the parts of the PCB assembly, including two charts of transistor and IC
information.
PARTS LIST