background image

35

Owner’s Manual

Owner’

s Manual

Mackie Limited Warranty

Please keep your sales receipt in a safe place.

This Limited Product Warranty (“Product Warranty”) is provided by LOUD Technologies Inc. (“LOUD”) 
and is applicable to products purchased in the United States or Canada through a LOUD-authorized 
reseller or dealer. The Product Warranty will not extend to anyone other than the original purchaser of 
the product (hereinafter, “Customer,” “you” or “your”).

For products purchased outside the U.S. or Canada, please visit www.mackie.com/warranty to fi nd 
contact information for your local distributor, and information on any warranty coverage provided by the 
distributor in your local market.

LOUD warrants to Customer that the product will be free from defects in materials and workmanship 
under normal use during the Warranty Period. If the product fails to conform to the warranty then LOUD 
or its authorized service representative will at its option, either repair or replace any such nonconforming 
product, provided that Customer gives notice of the noncompliance within the Warranty Period to the 
Company at: www.mackie.com/support or by calling LOUD technical support at 1.800.898.3211 (toll-
free in the U.S. and Canada) during normal business hours Pacifi c Time, excluding weekends or LOUD 
holidays. Please retain the original dated sales receipt as evidence of the date of purchase. You will need it 
to obtain any warranty service. 

For full terms and conditions, as well as the specifi c duration of the Warranty for this product, please visit 
www.mackie.com/warranty.

The Product Warranty, together with your invoice or receipt, and the terms and conditions located 
at www.mackie.com/warranty constitutes the entire agreement, and supersedes any and all prior 
agreements between LOUD and Customer related to the subject matter hereof. No amendment, 
modifi cation or waiver of any of the provisions of this Product Warranty will be valid unless set forth in a 
written instrument signed by the party to be bound thereby.

Содержание 1604-VLZ3





































Отзывы: