Mack V-MAC IV, Руководство оператора

Страница: 91 / 133

V-MAC Co-Pilot Operator's Manual 83
CO-PILOT® LAYOUT
Screen Types
The Co-Pilot® contains six types of display screens:
•
Start-Up Screens — A group of screens that appear when the vehicle management
and control vehicle management and control (V-MAC) IV system is energized.
Individual Start-Up screens are discussed in more detail in .
•
Menu Screens — A group of screens that appear with a menu selection depending
on whether the vehicle is stationary or moving. Individual Menu Screens are
discussed in more detail in .
•
Anytime Screens — A group of screens that can be displayed to a driver at any
time (whether the vehicle is moving or stationary). Individual Anytime Screens are
discussed in more detail in .
•
Stationary Screens — A group of screens that is only accessible when the vehicle
is stationary (Vehicle Speed = 0). These screen choices disappear from the
stationary MAIN MENU screen when the vehicle begins moving and are replaced
with the last anytime screen. Individual Stationary Screens are discussed in more
detail in .
•
Interrupt Screens — A group of special screens that appears during start-up or
operation to notify the driver of certain critical information. When an Interrupt
screen appears, the driver must do one of three things:
1 Key-in the requested information.
2 Press the Enter ( ↵ ↵
↵
) button to acknowledge the screen and turn off the warning
and/or alarm.
3 Take appropriate action to correct the condition that triggered the alarm.
For example, if the DRIVER ROAD SPEED ALARM screen appears, decelerate until
the vehicle speed drops below the limit which triggered the alarm.
Individual Interrupt Screens are discussed in more detail in .
•
Optional Systems Screens — A group of special screens that are accessible
depending upon availability.
Individual Option Systems Screens are discussed in more detail in .
https://truckmanualshub.com/