Mack M359 Скачать руководство пользователя страница 157

Страница: 157 / 332

STARTING AND DRIVING

FUELING

DANGER

DO NOT carry extra fuel containers in the

cab. Fuel containers, full or empty, may

leak, explode or give added fuel to a fire.

Failure to follow this precaution may lead

to serious personal injury or death.

DANGER

DO NOT smoke while fueling the vehicle.

The glow from the cigar/cigarette can

ignite the diesel fuel, causing an explosion

resulting in serious personal injury or

death.

DANGER

Do not remove the fuel tank cap near an

open flame. Diesel fuel vapors are

combustible and can cause an explosion

or fire, resulting in severe personal injury

or death.

CAUTION

Diesel-powered engines for heavy-duty

trucks built on or after January 1, 2010 are

designed to operate only with Ultra Low

Sulfur Diesel (ULSD) fuel. Improper fuel

use will reduce the efficiency and

durability of engines, permanently damage

advanced emissions control systems,

reduce fuel economy and possibly prevent

the vehicles from running at all.

Manufacturer warranties will be voided by

improper fuel use. Additionally, burning

Low Sulfur Diesel fuel (instead of ULSD

fuel) in 2007 and later model year diesel-

powered cars, trucks and buses is illegal

and punishable with civil penalties.

Air is always present inside the fuel

tanks, entering mainly through the tank

ventilation. With the air being heated

and cooled, condensation is formed and

water is mixed in the fuel. To avoid

condensation when the vehicle is parked

for longer periods, fill the tanks up to

95% of capacity. Do not fill more than

that, as the fuel needs to have room for

expansion during the heat of the day.

147

X Publication_PC28

Содержание M359













































































































































































































































































































































Результаты поиска

Содержание M359

Отзывы:

Похожие инструкции для M359

Бренды по названию

Популярные бренды

Mack M359, Руководство пользователя

Результаты поиска

Содержание M359

Отзывы:

Похожие инструкции для M359

Бренды по названию

Популярные бренды