Mack M359 Скачать руководство пользователя

Страница: 101 / 332

DRIVING ENVIRONMENT

DRIVER INFORMATION DISPLAY

Stalk Controls

The stalk on the right-hand side of the

steering column is used to navigate

through the Driver Information Display

(DID). Two buttons and the toggle

section assist in browsing the DID

menus.
The buttons allow the user to perform

the following DID functions:
• Toggle
• Enter
• Open the Applications menu (various

sub-menus are included)

• Open the Options menus (various

sub-menus are included)

• Return to the Home screen

NOTE

To return to the Home screen, press and

hold the Home button. Release the button

once the Home screen displays. Or scroll

through the DID screens until the Home

screen displays.

NOTE

Also, included on the stalk are the engine

brake toggle and cruise control brake

button.

Engine Brake Toggle

Applications/Home Button

Toggle Up Position

Options/Enter Button

Cruise Control Brake Increase (+)/ Decrease

(-) Button

Toggle Down Position

DID Menus

There are two menu types available:

Applications and Options. Several sub-

menus are password-protected while

the vehicle is parked.
The following screen is an example of

the DID Home screen.

NOTE

Some menus known as Non-Driving

menus are accessible only when the

vehicle is parked.

Applications Menus

The Applications menu contains the

following sub-menus:
• Vehicle Info: This menu provides

standard vehicle information.

• Tire Monitor: This menu provides the

tire pressure and temperature for

each axle.

X Publication_PC28

Содержание M359













































































































































































































































































































































Результаты поиска

Содержание M359

Отзывы:

Похожие инструкции для M359

Бренды по названию

Популярные бренды

Mack M359, Руководство пользователя

Результаты поиска

Содержание M359

Отзывы:

Похожие инструкции для M359

Бренды по названию

Популярные бренды