Getting Started with FeverWarn l Models FW100, FW120, FW130, FW200 and FW230 15
MachineSense • Sales: +1-443-457-1165 • [email protected] • www.feverwarn.com
Final Testing/Conducting Scans
With your sensor configured and mounted in its permanent location
and powered up, place your closed fist, palm down an inch or so below
the sensor as shown in
Figure 29. As soon as your fist comes into
the range of the sensor, the LED on the top of the scanner will turn
from white (resting state) to blue, indicating a warm object/person in
range. After it scans for a second or two, the LED will either turn green,
indicating that you are within the normal body temperature range or
red, which means an elevated body temperature.
Final Words
Your FeverWarn scanning system is now 100% operational. Browse
to
https://crystalball.machinesense.com/ and log in with your
company’s credentials for further help and to electronically access
this and other helpful documentation and videos.
Should you need additional support, please contact customer
support.
Contact Customer Support
• Email:
• Telephone: 443-457-1165
