MACHINE SOLUTIONS BEAHM DESIGNS 43-B, Руководство пользователя

Страница: 6 / 18

© Copyright. Machine Solutions Inc. All Rights Reserved PM-62319 REV B 6
Equipment User Manual
Temperature Controllers (Omega Platinum Model)
Please note, the Omega temperature controllers have been auto tuned and are set for
optimal performance. Contact Beahm Designs for further diagnostics and instructions.
PID Configuration (PRoG > PId.S)
Navigate to the desired setting. Settings include the following:
•
ACtN – Action direction moves up or down to SP1.
•
A.to – Autotuning Timeout sets a maximum amount of time for
Autotuning.
•
AUto – Initiates Autotuning
•
GAIN – Select the proportional, integral, and derivative factors for manual
tuning.
•
%Lo – Low clamping limit for Pulse and Analog outputs
•
%HI – High clamping limit for Pulse and Analog outputs
•
AdPt – Fuzzy logic adaptive tuning
Select the desired parameter.
Action Response (PRoG > PId > ACtN)
Select the Direction (ACtN) parameter.
Navigate to the desired setting. Settings include the following:
•
RVRS – “Reverse Action”: Increase to SP1, such as heating (factory
default)
•
dRCt – “Direct Action”: Decrease to SP1, such as cooling
•
RVRS/dRCt – Increase or Decrease to SP1, such as heating/cooling
Select the indicated setting.
Autotune Timeout (PRoG > PId > A.to)
Select the Autotune Timeout (A.to) parameter.
Set the amount of time before the Autotune process gives up and times out
in Minutes and Seconds (MM.SS). Slowly responding systems should have a
longer time-out setting.
Select the indicated setting.