Mace HydroMace XCi, Руководство по эксплуатации продукта, Страница: 238 / 270

Volume increment
The incremental value at which a pulse will be sent. In the example above, a pulse will be sent whenever an
increment of 1 Megalitre is totalised.
WARNING: A maximum of 10 pulses per second may be sent per measurement
interval. For example, during a measurement interval of three minutes (180 seconds)
a maximum of 1,800 pulses can be sent. If the XCi device has not sent all pulses by
the time of the next measurement, pulses WILL be lost.
Click “ Apply ” to save the settings then click “ Exit ” to return to the “ Configure outputs ” dialogue box.
Test a "Pulse" output
From the "
Edit Total pulse output
" dialogue box, click "
Test
".
1. Enter the " Number of pulses " that you wish to send to the connected " pulse counting device ".
2. Click " Send " and the pulses will be sent.
WARNING: A maximum of 10 pulses per second may be sent per measurement
interval. For example, during a measurement interval of three minutes (180 seconds)
a maximum of 1,800 pulses can be sent. If the XCi device has not sent all pulses by
the time of the next measurement, pulses WILL be lost.
Remove a "Pulse" output
1. From the " Configure outputs " dialogue box, highlight the output you wish to remove and then click
" Remove ".
2. You will be prompted to confirm the removal. Click " Yes " and the output will be removed.
MACE XCi User Manual - 238 -