Mace HydroMace XCi, Руководство по эксплуатации продукта, Страница: 201 / 270

"Total flow" - channel type
This channel is used to calculate an accumulated positive or negative total based on the results obtained
from configured flow rate channel/s.
Add a "Total flow" - channel type
1. From the “ Available flowrate channels
” list, highlight the "
Flowrate
" channel from which the "
Total
flow
"channel will receive its value. Click the “
Right arrow
” and the channel will appear in the
“
Source channel(s)
" list. A maximum of five flowrate channels can be totalised together.
2. Select either “ Totalise positive flow ” or “ Totalise negative flow ” depending upon your application.
WARNING: The “ Totalise positive flow ” type will only increment the totaliser.
If negative flows are recorded the totaliser will NOT decrement. The positive
totaliser rolls over to zero.
WARNING: The “ Totalise negative flow ” type will only decrement the
totaliser. If positive flows are recorded the totaliser will NOT increment. The
negative totaliser rolls over to zero.
NOTE: Both positive and negative flow rates will be recorded in the data file.
MACE XCi User Manual - 201 -