Mace HydroMace XCi, Руководство по эксплуатации продукта, Страница: 118 / 270

Edit XCi Channels
Once the required channels have been added, they must then be edited to ensure that the measured values
are meaningful.
WARNING: All configured channels MUST be edited prior to starting the XCi
device. Editing the channel/s enables the correct configuration information to be
sent to the controller module.
1. From the main “ Device Settings ” dialogue box click “ Configure channel ” and the “ Configure
channels ” dialogue box will appear.
2. Highlight the channel you wish to edit and click “Edit
”. A channel specific “
Edit channel
” dialogue
box will appear.
3. Edit the settings in the “ Edit channel
” dialogue box to suit your application as per the
recommendations in
XCi Channel Types
. In all cases, the "
Edit Channel
"dialogue box provides
information of:
l
" Channel path " - This describes the channel type and the card input source.
l
" Channel name " - This is the name given to the channel by the user when added to the
configuration .
l
" Decimal places " - The user can set the number of decimal places (0, 1, 2, 3) using the drop
down list box. Data can be logged with these decimals in the data file and displayed on the LCD.
4. Click “ Apply
” to save the settings and return to the “
Configure channels
” dialogue box.
MACE XCi User Manual - 118 -