![background image](http://html.mh-extra.com/html/macdon/r216/r216_unloading-and-assembly-instructions_685779065.webp)
215028
59
Revision A
7.7
Checking and Adding Lubricant in Cutterbar
WARNING
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove the key
from the ignition before leaving the operator
’
s seat for any reason.
WARNING
Exercise caution when working around the blades. Blades are sharp and can cause serious injury. Wear gloves when
handling blades.
1.
Park the machine on level ground.
2.
Lower the header onto 25 cm (10 in.) blocks under both ends of the cutterbar.
3.
Shut down the engine, and remove the key from the ignition.
1028638
A
Figure 7.19: Cutterbar Curtain
4.
Open cutterbar curtain (A).
1030742
A
A
Figure 7.20: Spirit Level on Cutterbar
5.
Use a spirit (bubble) level (A) to ensure the cutterbar is
level in both directions. Adjust the header accordingly.