![background image](http://html.mh-extra.com/html/macdon/r216/r216_unloading-and-assembly-instructions_685779063.webp)
215028
57
Revision A
7.6
Checking and Adding Oil in Header Drive Gearbox
IMPORTANT:
Check the gearbox oil level when the oil is warm. If the oil is cold, idle the machine for approximately 10 minutes prior to
checking.
WARNING
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove the key
from the ignition before leaving the operator
’
s seat for any reason.
1.
Park the windrower on a level surface.
2.
Start the engine.
3.
Adjust the header height until the cutterbar is parallel with the ground.
4.
Shut down the engine, and remove the key from the ignition.
1028481
A
Figure 7.17: Header Drive Gearbox Location
5.
Locate gearbox (A) on the left side of the header.