![background image](http://html.mh-extra.com/html/macdon/r216/r216_unloading-and-assembly-instructions_685779017.webp)
215028
11
Revision A
3.2
Lowering the Header
Complete the following steps to lower the header into working position after it has been lifted off its shipping trailer and
set down on the ground.
CAUTION
Ensure spreader bar is secured to the forks so that it cannot slide off the forks or towards the mast as the header is
lowered to the ground.
Table 3.1 Lifting Vehicle
Chain Type
Overhead lifting quality (1/2 in.)
Minimum Working Load
2270 kg (5000 lb.)
1028066
A
A
B
B
C
C
Figure 3.4: Block Placement
1.
Place wood blocks (A) at a distance of 42 cm (16 1/2 in.) (B)
on the outboard side of each shipping stand (C).
NOTE:
Wood blocks should be 2 x 4 in. and 1
–
1.5 m (3
–
5 ft.) in
length.