MacDon R116 Скачать руководство пользователя страница 168

Страница: 168 / 234

214713

160

Revision A

8.6

Road Friendly Transport

™

Option

1010559

Figure 8.13: Road Friendly Transport

™

System

The optional Road Friendly Transport

™

system allows the

disc mower to be towed while remaining within the legal
width restrictions on most roads and highways.

8.6.1

Converting from Field to Transport Mode (With Road Friendly

Transport

™

)

DANGER

To prevent serious injury or death, do NOT convert the machine into, or from transport mode until all
people, animals, and objects are clear of the unit

’

s rotational range.

WARNING

To prevent equipment damage, ensure cutterbar doors are properly closed before converting the machine
from field to transport mode.

IMPORTANT:

In some jurisdictions, having tall crop dividers installed can make the disc mower too wide for public roads when in
Road Friendly Transport

™

mode. If necessary, remove the dividers, and reinstall them after the machine is

transported. Refer to the disc mower operator's manual.

1018452

Figure 8.14: Transport Latch

If tightened, loosen bolts (B) on transport latch (A).

NOTE:

This step only needs to be completed the first time the
machine is converted from field to transport.

TRANSPORTING THE DISC MOWER

Содержание R116











































































































































































































































Результаты поиска

Содержание R116

Отзывы:

Похожие инструкции для R116

Бренды по названию

Популярные бренды

MacDon R116, Инструкции по разгрузке и сборке

Результаты поиска

Содержание R116

Отзывы:

Похожие инструкции для R116

Бренды по названию

Популярные бренды