MacDon R1 Series, Руководство оператора

Страница: 111 / 346

215333
95
Revision A
1003631
Figure 3.115: Cutterbar Doors
1. Lower the rotary disc pull-type fully.
2. Shut down the engine, and remove the key from
the ignition.
3. Open the cutterbar doors. For instructions, refer to 3.3.1
Opening Cutterbar Doors
–
North America, page 36 or 3.3.2
Opening Cutterbar Doors
–
Export Latches, page 37 .
1011348
A
B
Figure 3.116: Divider and Hardware
4. Remove three bolts (A) and nuts where the divider (B) will
be mounted.
5. Position the divider (B) on rotary disc pull-type, and
reinstall three bolts (A) and nuts. Tighten nuts.
6. Repeat for opposite side.
7. Close cutterbar doors. For instructions, refer to 3.3.3
Closing Cutterbar Doors, page 38 .
Removing Tall Crop Divider
DANGER
To avoid bodily injury or death from unexpected startup of machine, always stop engine and remove key from ignition
before leaving Operator's seat for any reason.
1003631
Figure 3.117: Cutterbar Doors
1. Lower rotary disc pull-type fully.
2. Shut down the engine, and remove the key from
the ignition.
3. Open the cutterbar doors. For instructions, refer to 3.3.1
Opening Cutterbar Doors
–
North America, page 36 or 3.3.2
Opening Cutterbar Doors
–
Export Latches, page 37 .
OPERATION