MacDon M2170NT, Руководство оператора, Страница: 171 / 558

262171
151
Revision A
4.3 D1X and D1XL Series Draper Headers
This section details the procedures necessary to physically attach a D1X or D1XL Series Draper Header to a windrower and
to complete its hydraulic and electrical connections.
4.3.1 Attaching Draper Header Supports
Draper header supports are required to attach the header to the windrower.
DANGER
To prevent bodily injury or death from the unexpected start-up of the machine, always stop the engine and remove the
key from the ignition before making adjustments to the machine.
B
E
B C
A
D
ϭϬϰϮϰϯϯ
Figure 4.85: Draper Header Supports
IMPORTANT:
Ensure that the correct header supports are used:
•
D1XL headers must use header supports (A).
•
D1X headers, or D1 headers converted for use with , can use
header supports (A) or (D).
•
A feature that distinguishes support (A) from all other types
is that rubber block (B) is attached to the support using two
nuts (C).
•
A feature that distinguishes support (D) from all other types
is that metal support (E) covers the rubber block.
•
To order header supports, refer to the header parts catalog.
ATTACHING HEADERS TO AND DETACHING HEADERS FROM WINDROWER