262175
252
Revision A
6.6
Definitions
The following terms, abbreviations, and acronyms are used in this instruction.
Table 6.13 Definitions
Term
Definition
A Series Header
MacDon A30S, A30D, A40D, A40DX, and Grass Seed auger headers
API
American Petroleum Institute
ASTM
American Society of Testing and Materials
Bolt
A headed and externally threaded fastener designed to be paired with a nut
Cab-forward
Windrower operation mode in which the Operator
’
s seat faces the header
Center-link
A hydraulic cylinder or manually adjustable turnbuckle type connection between the
header and the vehicle, which is used to change the angle of the header relative to the
vehicle
CGVW
Combined gross vehicle weight
D1X Series Header
MacDon D115X, D120X, and D125X rigid draper headers for M1 and M2 Series
Windrowers
D1XL Series Header
MacDon D130XL, D135XL, D140XL, and D145XL rigid draper headers for M1 and M2 Series
Windrowers
D2 SP Series Header
MacDon D215, D220, D225, D230, D235, and D241 draper headers for windrowers
DEF
Diesel exhaust fluid; also known as AdBlue in Europe, and AUS 32 in Australia
DEF supply module
A pump that supplies diesel exhaust fluid through the exhaust aftertreatment system
DM
Dosing module
DOC
Diesel oxidation catalyst
DWA
Double Windrow Attachment
EEC
Eco engine control
Engine-forward
Windrower operation with Operator and engine facing in direction of travel
FFFT
Flats from finger tight
Finger tight
Finger tight is a reference position in which the given sealing surfaces or components are
making contact with each other and the fitting has been tightened by hand to a point
where the fitting is no longer loose and cannot be tightened further by hand
GSS
Grass Seed
HarvestTouch
™
Display
Display / touch screen controller on an M2 Series Windower
Header
A machine that cuts and lays crop into a windrow when attached to a windrower
Hex key
A tool of hexagonal cross-section used to drive bolts and screws that have a hexagonal
socket in the head (internal-wrenching hexagon drive); also known as an Allen key
HDS
Hydraulic deck shift
JIC
Joint Industrial Council: A standards body that developed standard sizing and shape for
original 37° flared fitting
Knife
A cutting device found on a header
’
s cutterbar which uses a reciprocating cutter (also
called a sickle) to cut crop so that it can be fed into the header
n/a
Not applicable
NPT
National Pipe Thread: A style of fitting used for low-pressure port openings. Threads on
NPT fittings are uniquely tapered for an interference fit
Nut
An internally threaded fastener designed to be paired with a bolt
ORB
O-ring boss: A style of fitting commonly used in port openings on manifolds, pumps,
and motors
Содержание M2170
