MacDon M205 2010, Руководство оператора

Страница: 197 / 221

MAINTENANCE/SERVICE
Form 169469/169470/169471
195
Revision C
7.13 MAINTENANCE SCHEDULE
The maintenance schedule (see next page)
specifies the periodic maintenance procedures
and service intervals. Regular maintenance is
the best insurance against early wear and
untimely breakdowns. Following this schedule
will increase machine life. For detailed
instructions, refer to Section 7 MAINTENANCE
AND SERVICE. Use the fluids and lubricants
specified in Section 7.3.1, Recommended Fuel,
Fluids and Lubricants.
Service Intervals: The recommended service
intervals are in hours of operation. Where a
service interval is given in more than one time
frame, e.g. "100 hours or Annually", service the
machine at whichever interval is reached first.
IMPORTANT
Recommended intervals are for average
conditions. Service the machine more
often if operated under adverse conditions
(severe dust, extra heavy loads, etc.).
CAUTION
Carefully follow safety messages given
under Section 7.1 PREPARATION FOR
SERVICING, and Section 7.2
RECOMMENDED SAFETY PROCEDURES.
7.13.1 BREAK-IN INSPECTION
BREAK-IN INSPECTIONS
HRS ITEM CHECK
Every .25
Road or 1
in Field
Drive Wheel Nuts
Torque – 220 ft ∙ lbf (300 N ∙ m)
Repeat Checks Until Torque Stabilizes.
5
A/C Belt Tension
Caster Wheel Nuts Torque – 120 ft∙ lbf (163-172 N ∙ m)
Caster Wheel Anti-Shimmy Dampener Bolts
Inboard Bolt Torque – 100 ft ∙ lbf (135 N ∙ m)
Outboard Bolt Torque – 85 ft ∙ lbf (115 N ∙ m)
Walking Beam Width Adjustment Bolts Torque – 330 ft ∙ lbf (448 N ∙ m)
10
Walking Beam Width Adjustment Bolts Torque – 330 ft∙ lbf (448 N ∙ m)
Drive Wheel Nuts
Torque – 220 f t∙ lbf (300 N ∙ m)
Repeat Checks at 20 and 30 hours.
Neutral Dealer Adjust
50
Hose Clamps – Air
Intake/Radiator/Heater/Hydraulic
Hand Tighten Unless Otherwise Noted.
Walking Beam Width Adjustment Bolts Torque – 330 ft∙lbf (448 N∙ m)
Caster Wheel Anti-Shimmy Dampener Bolts
Inboard Bolt Torque – 100 ft∙lbf (135 N∙ m)
Outboard Bolt Torque – 85 ft∙lbf (115 N∙ m)
Drive Wheel Nuts
Torque 220 ft∙lbf ( 300 N ∙ m)
Repeat Checks Until Torque Stabilizes.
Drive Wheel Lubricant Change
Main Gearbox Oil Change
Charge System Hydraulic Oil Filter Change
Return Oil Filter (if applicable) Change