![background image](http://html2.mh-extra.com/html/macdon/m155e4/m155e4_assembly-instruction-manual_3395444176.webp)
215794
166
Revision A
8.3.2
Attaching A Series Auger Header
–
Hydraulic Center-Link without Self-
Alignment
If the windrower is equipped with a hydraulic center-link that lacks the self-alignment capability, the Operator will have to
manually attach the hydraulic center-link
’
s hook to the header
’
s center pin.
DANGER
To prevent bodily injury or death from the unexpected startup of the machine, always stop the engine and remove the
key from the ignition before leaving the operator
’
s seat for any reason.
1.
Shut down the engine, and remove the key from the ignition.
1000778
A
B
C
Figure 8.49: Header Boot
2.
Remove hairpin (A) from clevis pin (B) and remove the
clevis pin from header boots (C) on both sides of the
header.
1029714
A
B
Figure 8.50: Header Float Linkage
3.
Check that the float engagement pin is installed in storage
position (B) and
NOT
in engaged position (A).
IMPORTANT:
To prevent damage to the lift system when lowering the
header lift linkages without a header or a weight box
attached to the windrower, ensure that the float
engagement pin is installed in storage position (B) and
NOT
in engaged position (A).