4.6.4 Leveling the Header
The windrower lift linkages are factory-set to provide the proper header level, and should not normally require
adjustment. If leveling is required, follow these steps:
DANGER
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove
the key from the ignition before leaving the operator’s seat for any reason.
Before adjusting the header level, remove the
fl
oat spring
tension to ensure that lift linkages are not affected by the
springs.
1. Press rotary scroll knob (A) on Harvest Performance
Tracker (HPT) to display the QuickMenu system.
2. Rotate scroll knob (A) to highlight the header
fl
oat
symbol (B) and press scroll knob to select.
The
SET-UP FLOAT page displays.
Figure 4.183: HPT Display
3. Press soft key 3 (A) to remove
fl
oat.
Figure 4.184: HPT Display
214053
195
Revision A
Содержание M1240
