215634
40
Revision B
ϭϬϯϴϬϮϭ
A
D
B
C
C
C
C
Figure 3.1: Assembly Stand Setup
2.
Set the assembly stands on level ground.
3.
Space the stands out so that dimension (A) is 3470 mm (136 5/8 in.).
4.
Attach diagonal angles (B) to the stands using a 5/8 x 1.5 in. bolt and nut at locations (C).
5.
Torque the nuts to 153 Nm (113 lbf·ft).