MacDon M1170NT5, Руководство оператора

Страница: 213 / 504

215922
193
Revision A
1015027
A
B
Figure 4.163: HPT Run Screen
3. Press rotary scroll knob (A) on the HPT to display the
QuickMenu system.
4. Rotate scroll knob (A) to highlight header float icon (B) and
press the scroll knob to select.
1019608
A
B C
D
Figure 4.164: HPT Float Settings
5. Turn scroll knob (A) to highlight left float (B) or right
float (C) and press knob (A) to activate the selection.
6. Turn scroll knob (A) to adjust the float setting and press the
knob when finished.
IMPORTANT:
Float adjustments of 1.0 (out of 10) change the header
weight at the cutterbar by approximately 91 kg (200 lb.).
Adjust the float in increments of 0.05 to optimize field
performance.
7. Press soft key 3 (D) to remove or resume header float.
Removing and Restoring Float
1015027
A
B
Figure 4.165: HPT Run Screen
1. To display the QuickMenu system, press rotary scroll
knob (A) on the Harvest Performance Tracker (HPT) or press
F1 on the console.
2. Rotate scroll knob (A) to highlight HEADER FLOAT icon (B)
and press the scroll knob to select.
OPERATION