![background image](http://html2.mh-extra.com/html/macdon/flexdraper-fd1-series/flexdraper-fd1-series_unloading-and-assembly-instructions_3353032223.webp)
214685
211
Revision A
Adjusting Auto Reel Speed (CLAAS 500 Series)
The preset reel speed can be set when the automatic header functions are activated.
NOTE:
Changes may have been made to the combine controls or display since this document was published. Refer to the
combine operator
’
s manual for updates.
Figure 7.126: CLAAS Combine Display
1.
Use the < or > key to select REEL WINDOW. Window
E15 will display the current advance or retard speed of
the reel in relation to the ground speed.
Figure 7.127: CLAAS Combine Controls
2.
Press the OK key (C) to open the REEL SPEED
window.
3.
Use the
–
key (A) or the + key (B) to set the reel speed
in relation to the current ground speed. Window E15 will
display the selected reel speed.
Figure 7.128: CLAAS Combine Rotary Switch
4.
Manually adjust the reel speed by rotating the rotary
switch to the reel position (A), and then use the
–
or + key to set the reel speed.
Содержание FlexDraper FD1 Series
