215626
59
Revision A
3.3
Raising and Lowering Deck
Raising and lowering the Double Windrower Attachment (DWA) deck can be done from the windrower cab. There are two
control schemes available.
IMPORTANT:
Use extra caution when raising the deck for the first time after installation. The deck rotates as it is raised or lowered, and
the backsheet folds onto the deck. Make sure the deck and the backsheet are not interfering with any windrower parts or
with the forming shield (if installed).
$
%
Figure 3.2: Reel Fore-Aft Switch
If you chose to swap the DWA controls in the setup instructions
(refer to
2.8.1 Configuring Double Windrow Attachment
for details), use the REEL FORE-AFT switch on
the ground speed lever (GSL) to RAISE and LOWER the deck:
•
The deck moves forward when it is lowered, so the controls
will be the same as when moving the reel forward: REEL
FORWARD position (A) moves the DWA down.
•
The deck moves rearward when it is raised, so the controls
will be the same as when moving the reel rearward: REEL
AFT position (B) moves the DWA up.
$
%
Figure 3.3: Console Rocker Switch
If you chose not to swap the DWA controls in the setup
instructions (refer to
2.8.1 Configuring Double Windrow
for details), use the console DECK
LIFT CONTROLS rocker switch to move the DWA UP and DOWN.
•
Press rocker switch forward portion (A) to lower the DWA
(DWA DOWN).
•
Press rocker switch rearward portion (B) to raise the DWA
(DWA UP).
Содержание DWA
