MacDon DWA, Руководство по эксплуатации и запасным частям

Страница: 35 / 98

OPERATION
3.3 Raising and Lowering the Deck
NOTE:
Use extra caution when raising the deck for the first time. The deck rotates as it rises and lowers, and the
backsheet folds onto the deck. Make sure the deck and backsheet are not interfering with windrower parts or the
forming shield. If interference does occur the proximity sensor will need to be adjusted. Refer to Section
3.3.2
Adjusting the Proximity Sensor, page 29 .
DWA raise and lower can be controlled in three ways:
1. Raise and lower the DWA deck by using the reel raise
button (A) and the reel lower button (B) respectively
on the ground speed lever (GSL). The operator can
interrupt the raising and lowering of the deck by letting
go of the buttons.
Figure 3.2: GSL
2. Raise the DWA deck by pressing button (A) or lower the
deck by pressing button (B) on the operator’s console.
The operator can interrupt the raising and lowering of
the deck by letting go of the buttons. The operator can
interrupt the raising and lowering of the deck by letting
go of the buttons.
Figure 3.3: Operator’s Console
214048
27
Revision A