169784
44
Revision H
1011714
A
B
C
Figure 3.64: Light Cover
7.
Reinstall bracket (A) on lighting cover (B) with existing
hardware (C).
1011710
A
B
Figure 3.65: Light Installed on Endsheet with
Endshield Removed
8.
Position light assembly (A) on endsheet, picking up existing
holes, and install three 3/8 NC x 3/4 in. carriage bolts (B)
(MD #21472) and flange nuts (MD #30228).
9.
Do
NOT
reinstall lighting cover at this time.
3.12.2
Installing Reel Arm Light
To install the reel arm light, follow these steps:
1011724
A
Figure 3.66: Reel Arm
1.
Retrieve right rear light assembly from transport kit.
2.
Remove the two outboard existing bolts (A) that attach
fore-aft cylinder support to reel arm.
Содержание D65
