![background image](http://html.mh-extra.com/html/macdon/d50/d50_operators-manual_685672066.webp)
169441
54
Revision D
3.12.8
Reel Height
The crop type and condition determines the operating height of the reel.
Set the reel height to carry material past the knife and onto the drapers with minimal disturbance and damage to the cut
crop. For instructions, refer to
3.12.9 Reel Fore-Aft Position, page 55
The reel height is controlled using switches in the windrower cab.
Table 3.6 Reel Height
Crop Condition
Reel Position
Lodged rice
Lowered (also change reel speed and/or cam setting)
Bushy or heavy standing (all)
Raised
The following conditions might result if the reel is set too low:
•
Crop loss over the header backtube
•
Crop disturbance on the drapers caused by the reel fingers
•
Crop being pushed down by the tine tubes
The following conditions might result if the reel is set too high:
•
Cutterbar plugging
•
Crop lodging and being left uncut
•
Grain stalks dropping ahead of cutterbar
Refer to
for recommended reel height in specific crops and crop conditions.
IMPORTANT:
Maintain reel clearance to prevent fingers contacting the knife or the ground. For instructions, refer to
Clearance to Cutterbar, page 197
.
Содержание D50
Страница 101: ...169441 89 Revision D 10 Tighten bolts B OPERATION ...
Страница 124: ......
Страница 295: ...topsoil moisture 83 types 80 weather and topography 83 WOT definition 19 INDEX ...
Страница 296: ......