![background image](http://html.mh-extra.com/html/macdon/d50/d50_operators-manual_685672227.webp)
169441
215
Revision D
ϭϬϰϬϭϰϮ
A
B
C
Figure 4.190: Reel Drive
12. Slide the motor and motor mount (B) up until the tension
on chain (C) is such that hand force deflects the chain 3 mm
(1/8 in.) at mid-span.
13. Tighten nuts (A), and then recheck the tension.
14. Reinstall the drive cover. For instructions, refer to
.
Replacing Reel Drive Sprocket
The reel drive sprocket is attached to the reel drive motor.
Removing Reel Drive Sprocket
–
D50
The reel drive sprocket is attached to the reel drive motor.
DANGER
To prevent bodily injury or death from the unexpected start-up or fall of a raised machine, always stop the engine and
remove the key from the ignition before making adjustments to the machine. NEVER climb onto or go underneath an
unsupported header.
1.
Shut down the engine, and remove the key from the ignition.
2.
Remove the reel drive cover. For instructions, refer to
Содержание D50
Страница 101: ...169441 89 Revision D 10 Tighten bolts B OPERATION ...
Страница 124: ......
Страница 295: ...topsoil moisture 83 types 80 weather and topography 83 WOT definition 19 INDEX ...
Страница 296: ......