![background image](http://html.mh-extra.com/html/macdon/d50/d50_operators-manual_685672193.webp)
169441
181
Revision D
4.9
Drapers
Two side drapers (A) convey cut crop to the center opening. Replace the side drapers if they are torn, cracked, or
missing slats.
4.9.1
Adjusting Draper Tension
The drapers are tensioned at the factory and should not require adjustment. If adjustment is required, draper tension
should be just enough to prevent slipping and to keep the draper from sagging below the cutterbar.
DANGER
To prevent bodily injury or death from the unexpected start-up or fall of a raised machine, always stop the engine,
remove the key, and engage the safety props before going under the machine for any reason.
1020638
A
Figure 4.124: Left Adjuster Shown
–
Right Opposite
1.
Ensure white indicator bar (A) is at the halfway point in
the window.
DANGER
Check to be sure all bystanders have cleared the area.
2.
Start the engine.
3.
Raise the header fully.
4.
Shut down the engine, and remove the key from
the ignition.
5.
Engage the header safety props.
1008417
A
Figure 4.125: Drive Roller
6.
Ensure the draper guide (the rubber track on the underside
of the draper) is properly engaged in groove (A) on the
drive roller.
Содержание D50
Страница 101: ...169441 89 Revision D 10 Tighten bolts B OPERATION ...
Страница 124: ......
Страница 295: ...topsoil moisture 83 types 80 weather and topography 83 WOT definition 19 INDEX ...
Страница 296: ......