![background image](http://html.mh-extra.com/html/macdon/d50/d50_operators-manual_685672109.webp)
169441
97
Revision D
3.21.3
Converting from Transport to Field Position
The header needs to be converted back to field position if it was towed to a new location.
Removing Tow-Bar
The transport tow-bar can easily be disassembled and stored on the header.
1001721
A
B
C
D
Figure 3.93: Tow-Bar Assembly
1.
Block the tires to prevent the header from rolling, and
unhook the header from the towing vehicle.
2.
Disconnect electrical connector (A) on the tow-bar.
3.
Remove pin (B) from the tow-bar, and detach outer
section (C) from inner section (D).
1001725
A
Figure 3.94: Wiring Connector
4.
Disconnect electrical connector (A) at the front wheel.
1001154
A
B
C
Figure 3.95: Tow-Bar Latch
5.
Remove clevis pin (A) and set aside for reinstallation.
6.
Push latch (B) and lift tow-bar (C) from the hook.
Release latch.
7.
Install clevis pin (A).
Содержание D50
Страница 101: ...169441 89 Revision D 10 Tighten bolts B OPERATION ...
Страница 124: ......
Страница 295: ...topsoil moisture 83 types 80 weather and topography 83 WOT definition 19 INDEX ...
Страница 296: ......