215184
323
Revision A
Setting Minimum Reel Speed and Calibrating Reel
–
AGCO IDEAL
™
Series
WARNING
Clear the area of other persons, pets etc. Keep children away from machinery. Walk around the machine to be sure no
one is under, on, or close to it.
NOTE:
Up-to-date images of the IDEAL
™
combine display were not available at time of publishing. For instructions, refer to the
combine operator
’
s manual for updates.
1027729
A
Figure 9.33: Reel Settings on Combine Main Menu
1.
From the COMBINE MAIN MENU, touch REEL SETTINGS (A)
to open the REEL SETTINGS page.
1018429
A
B
Figure 9.34: Reel Settings Calibration
2.
To set minimum reel speed, touch SPEED MINIMUM
FIELD (B). The on-screen keyboard displays. Enter the
desired value. Touch the green check mark to accept the
new value, or the red X to cancel. The reel speed is shown
in miles per hour (mph) and rotations per minute (rpm).
NOTE:
At the bottom of the REEL SETTINGS page, the reel
diameter and reel pulses per revolution (PPR) are displayed.
These values have already been set in the HEADER
SETTINGS page.
3.
Reel speed is calibrated on the REEL SETTINGS page by
touching CALIBRATE button (A) in the top right of the page.
NOTE:
The CALIBRATION WIZARD opens and displays a hazard
warning.